Your Universal Remote Control Center
RemoteCentral.com
UEI Nevo Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Nevo Studio Pro
This thread has 12 replies. Displaying all posts.
Post 1 made on Monday December 8, 2014 at 16:15
lgermanetti
Long Time Member
Joined:
Posts:
December 2008
26
Hello,

I am a A/V Programmer, I installed a lot of This guys a few years back. Ended up with one in my living room. My old Cpu crashed and I can't find a copy of Nevo studio Pro anymore! Does anybody have an installer I can use?
That would really help!
Post 2 made on Monday December 8, 2014 at 19:47
Duct Tape
Super Member
Joined:
Posts:
November 2008
4,682
Sent you a private message
[Link: facebook.com]
OP | Post 3 made on Monday December 8, 2014 at 22:24
lgermanetti
Long Time Member
Joined:
Posts:
December 2008
26
Thank you!
Post 4 made on Friday January 9, 2015 at 04:39
Jefman
Junior Member
Joined:
Posts:
January 2015
1
Hi,

I'm in the same situation, got a S70 but lost my software. Could you help me also ?

Thanks!
Post 5 made on Saturday February 7, 2015 at 08:00
david347
Junior Member
Joined:
Posts:
February 2015
1
Hi sorry to bug
Just read your message about nevo s70 software, i recently bought a s70 off ebay without doing any research i no stupid was worndering if you could point me in the right direction.

Any help would be great thanks.
d pegg
Post 6 made on Tuesday March 3, 2015 at 22:58
audiovideolink
Lurking Member
Joined:
Posts:
November 2007
6
Greetings not much to say about me but that Im looking for Nevo Studio Pro software.
Also your rate of the ease of use Im URC and RTI certified.
May be willing to pay if your interested in modify existing programming in remote.
Please let me know your thoughts on this.
thank you

[email protected]
Post 7 made on Thursday April 9, 2015 at 19:55
Doug1952
Junior Member
Joined:
Posts:
March 2015
1
Hi
I got certified as a programmer for the Nevo, shortly after the plug got pulled and Nevo was no longer supported, more like abandoned. In my frustration I threw out everything I had associated with it. Big mistake!!

Can anyone help me with getting a copy of version 3.0 software for programming the s70. I've recently gotten a number of request to reprogram some clients hardware.

I would really appreciate and be indebted to you if I could get it as soon as possible.
Thank you
Doug
Doug L
Post 8 made on Monday July 31, 2017 at 21:58
JMarcosPG
Junior Member
Joined:
Posts:
July 2017
11
Dear All,

This is very frustrating! After many years using my S70 I finnaly decided to reprogram it... Even though I have the original software Studio Pro (I managed to install it properly on My Windows 10 and successfully connected the remote to it) nevertheless, software crashes on the registration screen (mynevo.com)!

I did a lot of research here and on the web, I even installed an emulator to run Windows XP here... Same problem on registration screen! Installed dotnet (v1.0) and (v1.1) and followed procedures suggested (IPv6 Protocol deactivation and so on)... Nothing solved the problem!

It seems that mynevo.com is eithrt offline or no support is provided anymore on the webpage).

Any ideas, please?

Tks a lot!
Johnny Garcia
Post 9 made on Monday July 31, 2017 at 22:00
JMarcosPG
Junior Member
Joined:
Posts:
July 2017
11
Hi Doug, did you manage to get a copy and reprogram your client´s remotes?
Johnny Garcia
Post 10 made on Tuesday August 1, 2017 at 04:30
brodyboy
Long Time Member
Joined:
Posts:
April 2008
370
On July 31, 2017 at 21:58, JMarcosPG said...
Dear All,

This is very frustrating! After many years using my S70 I finnaly decided to reprogram it... Even though I have the original software Studio Pro (I managed to install it properly on My Windows 10 and successfully connected the remote to it) nevertheless, software crashes on the registration screen (mynevo.com)!

I did a lot of research here and on the web, I even installed an emulator to run Windows XP here... Same problem on registration screen! Installed dotnet (v1.0) and (v1.1) and followed procedures suggested (IPv6 Protocol deactivation and so on)... Nothing solved the problem!

It seems that mynevo.com is eithrt offline or no support is provided anymore on the webpage).

Any ideas, please?

Tks a lot!

Don't try to register the software.....the company doesn't exist. You have to use it as is, without company support.
Post 11 made on Tuesday August 1, 2017 at 08:53
JMarcosPG
Junior Member
Joined:
Posts:
July 2017
11
Nope, Brodyboy at least here in my software version if I do not register it, software essential functions such as download and upload info to the remote are tottally unavailable! There must exist a cracked version to overcome this limitation, right? Could you send me a copy of yours? Tks a lot!
Johnny Garcia
Post 12 made on Tuesday August 1, 2017 at 13:48
brodyboy
Long Time Member
Joined:
Posts:
April 2008
370
My archive copy is just the same NSP 3.0 everyone else has. I've never heard of a cracked version, or a one specifically meant to not require registration.

If you can do everything but download to the remote, I'd focus on that connection. Which version of Widows are you using? While there may be other options that are successful, the only setup I use for this software is Windows 7, with Mobile Device Center installed. Anything else gave me headaches and hiccups...specifically in connecting/downloading to the remotes. (Mobile Device Center was retired and purportedly replaced by other features in newer versions of Windows, but in my experience, NSP won't play ball with those.)


It's a pain, but I've kept one laptop on Windows 7 solely for the purpose of maintaining my Nevo remotes.
Post 13 made on Wednesday August 2, 2017 at 07:19
JMarcosPG
Junior Member
Joined:
Posts:
July 2017
11
It does not look like its a connection issue... tested on XP and Win 10 using Windows Media Center... it connects just fine, when I click on any relevant system option a pop up message says that software registration is mandatory before using such command...
Johnny Garcia


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse