Post 1 made on Tuesday July 30, 2013 at 13:53 |
skent Lurking Member |
Joined: Posts: | September 2003 8 |
|
|
Well I have inherited a job with 2 Q50 remotes and I have never programmed Nevo Remotes. I need to make some fairly large changes to one of the remotes that consist of New receiver, New TV, program zone 2.
I was able to find the Studio Pro 3.0 software however when connecting the remote to my laptop via USB I cannot get the software to locate the Q50.
Also not sure if the program lives on the Q50 or the Nevo Connect.
Any help would be great!
|
|
Post 2 made on Tuesday August 6, 2013 at 13:10 |
TimmyS Long Time Member |
Joined: Posts: | March 2011 235 |
|
|
The program lives on the remote.
What version of windows are you running? Perhaps this is an issue?
You may need to add a small windows program so the Q50/NC50 connects to your pc depending on the windows version.
ATM I forget the name but I can check.
You may need to upgrade the firmware on the Q50 and the NC50.
Otherwise NeVo remotes are cake to program and their database is huge.
Good luck,
Tim
|
|
|
Post 3 made on Tuesday August 6, 2013 at 13:39 |
TimmyS Long Time Member |
Joined: Posts: | March 2011 235 |
|
|
|
Post 4 made on Tuesday August 6, 2013 at 21:23 |
Make sure you have activesync installed and running on your laptop. [Link: microsoft.com]
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.