Post 1 made on Saturday January 8, 2011 at 19:20 |
krisstewart10 Lurking Member |
Joined: Posts: | December 2010 2 |
|
|
I have been pulling my hair out for days now trying to get my S70 to connect to my wifi. I have an Apple Time Capsule wireless router. The nevo S70 just keeps repeating the associating cycle but never connects. I have tried turning of security, changing from wpa to wpa2, changing ssid, channel, just about every combination there is. Any ideas?
I'm also looking to add pc style overlay menu like I've seen on some examples, does anyone know how to achieve this in NSP 3?
|
|
Post 2 made on Sunday January 9, 2011 at 08:15 |
audiojan Long Time Member |
Joined: Posts: | December 2010 13 |
|
|
Had the same problem... make sure you are not using 802.11n... has to be a or b or the Nevo won't connect to it.
|
|
Post 3 made on Wednesday January 12, 2011 at 22:49 |
RemoteQuest Long Time Member |
Joined: Posts: | October 2008 245 |
|
|
Yes, indeed cannot be N as AudioJan says. Plus the best way to start is no security and turn off the security on your wap or router for a few minutes to test the ability to connect.
|
|
Post 4 made on Thursday January 13, 2011 at 04:19 |
MattyMcfly Long Time Member |
|
|
Also make sure that Wi-Fi in enabled on the page collection that you are trying to access Wi-Fi from, a new feature in NSP3 allows you to turn Wi-Fi on & off on each page collection to save you battery life.
This feature can be found in the properties tab in the bottom right of the software when you click on the header page of the page collection
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.