Your Universal Remote Control Center
RemoteCentral.com
UEI Nevo Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Trouble programming with Nevo C3 and DirecTV
This thread has 4 replies. Displaying all posts.
Post 1 made on Sunday November 7, 2010 at 00:07
BigSproul
Junior Member
Joined:
Posts:
November 2010
3
Just got my Nevo C3 today, was able to program my TV, and Amp on it, but can't get my DirectTV box to work. I just got the box earlier this week, so don't know if maybe it's a new one without and Nevo codes yet or what. Here's the Info..

DirecTV DVR Model = HR24NC-200

When I get to the spot where it says to enter your DirecTV model number, that one doesn't pop up. An HR24 pops up, but it doesn't work when I test it.

Been a little frustrated with any online help from the makers of the remote, it's basically non-existant...

Any help is greatly appreciated!
Post 2 made on Sunday November 7, 2010 at 12:30
Duct Tape
Super Member
Joined:
Posts:
November 2008
3,911
are you trying to control it via IR or RF?  

[Link: facebook.com]
Post 3 made on Sunday November 7, 2010 at 18:23
sydinstaller
Active Member
Joined:
Posts:
February 2004
737
There should be an auto search feature.

Are you programming it via internet explorer or direct on the remote?
I strongly advise using the programming environment and not directly from the remote.

D.
OP | Post 4 made on Sunday November 7, 2010 at 21:26
BigSproul
Junior Member
Joined:
Posts:
November 2010
3
The controller says IR is on...I haven't tried to turn that off. I'll have a go at it now..

I tried the auto search feature, and went through all the different codes(40ish) that it gave me...No luck...

Thanks for the help you all. I'm not at all an expert, the a/v guy who sold me the remote said it should be pretty easy to set up once my DirecTV is installed. He'll be here Wednesday, but I'd rather get it figured now. I hate having new toys and not being able to use them...
OP | Post 5 made on Sunday November 7, 2010 at 21:36
BigSproul
Junior Member
Joined:
Posts:
November 2010
3
Just tried it with the RF off..no dice...In the previous message I meant to say RF and not IR...

thanks again


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse