Your Universal Remote Control Center
RemoteCentral.com
UEI Nevo Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Nevo S70 - send command to IP device - nothing happens
This thread has 3 replies. Displaying all posts.
Post 1 made on Tuesday June 1, 2010 at 16:12
Tommie
Lurking Member
Joined:
Posts:
June 2010
3
Hi,

I'm trying to connect my nevo widget to an IP device. The IP device is a java program with a TCP listener.

When I use the command in a widget as an action, the IP device executes the correct action.

However when I use a constant to send the same command to the IP device in the widget, nothing happens.

Any ideas?

Thx,
Tom
Post 2 made on Tuesday June 1, 2010 at 23:39
sydinstaller
Active Member
Joined:
Posts:
February 2004
740
Sounds like the "device" is not setup correctly in NSP.

Can you email me the job file and some example strings?

My email is in my profile.

D.
Post 3 made on Wednesday June 2, 2010 at 21:09
sydinstaller
Active Member
Joined:
Posts:
February 2004
740
Hi Tommie,

I believe the issue is with the multiplexer (also the string you are sending is different to what you said in your email).

Some things to remember:
You do not need to add \r\n to the end of the string as it is in the device properties.
You do not need to use both outputs of the button to trigger the send.
The multiplexer will output data. So using the converter will add that to the string. A contant is better.

I have added what I think should be the correct way. I could not test it as I could not get the Java file to work. Let me know if it is OK.

I have also added a slider. I am not sure if it will work with the java script but assuming all your supplied instructions were correct then it should work.

There are also some "sniffer" buttons to see what is going on in the widget. Delete them when you use the final file.



I can't use hotmail at work so I had to post your file here:

www.mediafire.com/file/wdlnhjzrzqk/Tommie.nvj

Please let me know how it goes.

D.
OP | Post 4 made on Tuesday June 8, 2010 at 14:21
Tommie
Lurking Member
Joined:
Posts:
June 2010
3
As usual, once you know the solution it is easy. I always tried it with the emulator, never on the nevo controller itself, and that seemed to do the trick. Probably the emulator does not yet work correctly for IP devices.

Thanks to excellent advice of D.: You are correct. No Widgets or .Nevo plug-ins work in the emulator, IP devices will work but only outside widgets.

It might save you some time.
Tom


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse