Your Universal Remote Control Center
RemoteCentral.com
UEI Nevo Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Multi-Sensor and s70
This thread has 6 replies. Displaying all posts.
Post 1 made on Thursday December 3, 2009 at 14:45
TheProffessor
Lurking Member
Joined:
Posts:
December 2009
6
HI

Has anyone got a multi sensor to work with Nevo ie (ZWave HSM100) The nevo seems to see it but I cant work out how this would be addressed?

Cheers

Phil
Post 2 made on Thursday December 3, 2009 at 16:02
chillspace
Long Time Member
Joined:
Posts:
August 2009
43
What exactly is the issue?
OP | Post 3 made on Friday December 4, 2009 at 02:52
TheProffessor
Lurking Member
Joined:
Posts:
December 2009
6
The hsm100 return four states, Temp, Light, Movement and its own battery level. In Homeseer these are seen as four separate devices. The idea was that I would use the light level and temperature to set the home cinema environmental and lighting levels.
The Nevo does not seem to have the requisite widgets to allow this and also only seems to see one device on pairing. I can now do this through Homeseer (thanks Eric) but it would have been nice to use the if..then options on the remote.
Post 4 made on Friday December 4, 2009 at 22:48
chillspace
Long Time Member
Joined:
Posts:
August 2009
43
That truly sucks. I was planning on picking up a few hsm100 units for my house and pair them up with the Q50 and Homeseer. On top of that, it seems that the Q50 can't get the temp sensor from my Intermatic Z-wave thermostat and display it on the screen. Not sure if it is a thermostat/Nevo compatibility thing or not, but I'm thinking of picking up an RCS Z-wave thermostat to see if that makes a difference. Good luck with you Nevo/Homeseer endeavors, post your progress, as it would be nice to know what is working and what isn't...I'll do the same.

Eric
Post 5 made on Monday March 22, 2010 at 02:00
chillspace
Long Time Member
Joined:
Posts:
August 2009
43
Nevo just released NevoStudio Pro 3.0 and it now includes the ability to script custom Nevo widgets for 2-way communication with rs232, IP and ZWave devices. I'm hoping that this will allow the ability to query the HSM100. Here's hoping.

Eric
Post 6 made on Monday April 26, 2010 at 07:17
Chak
Long Time Member
Joined:
Posts:
July 2005
48
Are the HSM100 working with NevoStudio Pro 3?
Post 7 made on Monday April 26, 2010 at 07:33
sydinstaller
Active Member
Joined:
Posts:
February 2004
740
Hi,

I don't know if this is of any help.

There is a HVAC file located here.

I don't remember where I got it or if it even works!
I don't have any z-wave hvac gear to test it.

Use at your own risk. :)


[Link: mediafire.com]

D.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse