Post 1 made on Thursday February 27, 2003 at 18:41 |
mikepa Long Time Member |
Joined: Posts: | February 2003 37 |
|
|
I was wondering if neoHacker can be used to change the duration of IR commands - the field is editable but it always seems to have 0;0 in there? Does anyone have any idea what the numbers mean?
I have a remote that is sending Nav Up commands "too long" and I end up with Nav Up Twice for each press.
|
|
Post 2 made on Friday February 28, 2003 at 12:38 |
Captain Canuck Long Time Member |
Joined: Posts: | December 2002 42 |
|
|
Well I can tell you that increasing the second number will increase the duration of the signal. I've used that on a few of my problem buttons. I don't know how you would shorten it...maybe increase the first number? Guess you'll have to experiment with it.
Brad
|
|
Post 3 made on Friday February 28, 2003 at 18:33 |
RWI Founding Member |
Joined: Posts: | December 2001 592 |
|
|
I have used 0.5 durations for all of my dishnetwork recievers and it has worked well, remember after changing the value you have to hit the save button at the bottom or it will revert to 0.0. The other thing changing the value seems to do is kill the repeating function of the button, so you will have to keep clicking the button through menu's
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.