Post 1 made on Saturday January 4, 2003 at 12:01 |
tcapaldi Lurking Member |
Joined: Posts: | January 2003 1 |
|
|
I just got my Pronto NEO TSU500 and I'm trying to set-up the remote to work with my receiver. Does anyone have the codes for the Yamaha RX-V595? I'm a new NEO user so any other advice would be appreciated as I try to navigate through the set-up, learning and macro features.
Thanks. -ted
|
|
Post 2 made on Saturday January 4, 2003 at 13:08 |
koehler Lurking Member |
Joined: Posts: | January 2003 2 |
|
|
I have done some basic setup work with my RX-V595, and found that almost everything I needed was learnable from the remote. The exception I found was that I don't have any good way of programming my speaker A/B settings. It was easy enough to learn the speaker A/speaker B buttons, but what's really needed are separate codes for speaker B on and speaker B off. In general, I find that it's easier to learn the functions I use from the original remote than to get them from others.
Mike
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.