| Post 1 made on Monday October 28, 2002 at 19:02 |
zecha Lurking Member |
Joined:
Posts: | October 2002
2 |
|
|
I can't get my ProntoNeo to learn my X10 PalmPad Remote? Has anyone had any luck with this? I downloaded a couple X10 NCFs from here but I think they're for X10s ActiveHome setup. I got this ProntoNeo to replace all my remotes. So I hope someone can help me out. Thanks!
|
|
| Post 2 made on Wednesday October 30, 2002 at 09:08 |
Remember that the X10 PalmPad Remote uses RF not IR therefore cannot be learned on the Neo.
You nee an X-10 IR receiver that will convert IR to RF. Look in the X-10 forum.
Martin :-)
|
|
| OP | Post 3 made on Thursday November 7, 2002 at 21:30 |
zecha Lurking Member |
Joined:
Posts: | October 2002
2 |
|
|
here's the deal, people. the X10 ncf's that you can download do work. but you have to have the X10 IR543 RF/IR adapter. you plug the IR543 in the wall and it takes the place of the X10 TM751 transceiver module (if you had something plugged into the TM751, you will have to replace the module with a lamp or appliance module). this is great! hope this helps someone out.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
