Does anyone know how to make the prontoneo work with the Sony db930 receiver? The Sony uses a 2-way remote commander (RM-LJ302) and whenever I try to learn the commands I get a fail response. Thanks.

I have the DB925 but I think the codes are the same, I could not learn from the remote either. All I could do was download someone elses DB930 NCF file from this site and extract the codes using NeoHacker. HTH.

Here is what I have.

Type of device: Tuner
Brand: Sony
Codeset: 1285


Learned Commands:

Off:
0 f 6c 3 5a 2e 17 2f 5f 3f 5f bc 4a 44 4 4 0 0 c4 37

On and Select CD Input:
0 f 6c 4 5b 2f 16 19 2f 64 3f 5f bc 8e 84 44 48 44 44 c8 37


On and Select TV Input:
0 f 6c 5 5b 2e 15 18 30 67 15 3f 6f bc 32 21 21 21 52 47 84 7c 3

On and Select DVD Input:
0 f 6c 4 5b 2c 14 31 1b 66 3f 5f bc 4e 48 44 44 88 88 c4 37

On and Select Video Input:
0 f 6c 5 5b 30 18 15 30 64 16 3f 6f bc 32 64 13 91 11 11 91 7c 3

On and Select Tuner:
0 f 6c 4 5b 30 13 1b 31 66 3f 5f bc 8e 44 44 48 44 44 c8 37

Preset Down:
0 f 6c 4 5b 2e 18 2f 5f 17 3f 5f bc 4a 0 40 0 4 44 cc 37

Preset Up:
0 f 6c 3 5b 2f 18 2f 5f 3f 5f bc a 0 40 0 4 44 c0 37



Hope that helps.
Aaron

I'm confused about neohacker and pronto2neo. If I need the ir codes from a pronto cf how do I extract the numbers from the cf in order to plug it into the pronto2neo utility? And when does neohacker come into play? Thanks

Carol,

I don't think you need the pronto2neo utility anymore. I'm pretty sure the neohacker converts the pronto codes to pronto neo codes.

Learn an ir command to the button you want to put the code in. Run neohacker. Open your ncf. Navigate to the button you want to program. Open 'Actions' and 'Learned IR'. Click on the code, then past the new code into the field at the bottom of the program. Hit the save parameter button. Then save the ncf.

That's it.

thanks, but how do I get the actual ccf numbers? I can download ccf's from this site but they are meaningless because neohacker can't "open" a ccf, it can only open an ncf (unless I am doing something wrong).

You use the software for the Pronto remote, which is also hee in the files section. You open up the CCF and go to the button with the code you want and procced from there...

-steve

THANKS!