Post 1 made on Monday August 12, 2002 at 14:10 |
nutfluff Lurking Member |
Joined: Posts: | August 2002 1 |
|
|
Occasionally my NEO freezes up where the IR icon on the upper right stays on and the only way to reset it is to take out the batteries. Does anybody know why this is happening and/or how to fix it?
Thanks.
|
|
Post 2 made on Monday August 12, 2002 at 17:16 |
Butch Searle-Spratt Long Time Member |
Joined: Posts: | July 2002 155 |
|
|
Are you using NIMH batteries? Mine stopped freezing when I switched over to Alks. What firmware version are you using. You should be using NeoEdit 2.0 and firmware 1.4.3 both available here. Butch
|
|
Post 3 made on Tuesday August 13, 2002 at 20:54 |
wburton Long Time Member |
Joined: Posts: | August 2002 11 |
|
|
I have the same problem every once in a while.
If I reset the unit (by popping out a battery and putting it back in), that clears the lockup, but it does it again as soon as I press the offending button (which is different every time this happens).
I re-download my configuration, and that seems to fix it. Until I mess with my configuration again.
\\/alter
This message was edited by wburton on 08/13/02 20:55.30.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.