|
|
|
Philips ProntoNEO Family Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
HELP with Yamaha discrete codes!!
| |
|
Topic: | HELP with Yamaha discrete codes!! This thread has 9 replies. Displaying all posts. |
|
Post 1 made on Monday August 5, 2002 at 15:00 |
Gary D. Walborn Long Time Member |
|
|
I'm totally frustrated. I have been looking for discrete codes to shift my Yamaha RX-v800 receiver into and out of 6-channel mode. I was delighted when I found pdf files detailing extended IR codes on the Yamaha Web site. I figured that, with these codes in hand, success was not far away. I figured wrong.
Following instructions posted by regban on 4/12, I got IRTool and a 'known' Yamaha discrete code for the Pronto. I decoded the known code. The listed code for "6CH INPUT ON" is listed in the Yamaha docs as Custom Code "7 E" and Data Code "A 4". I converted these to decimal and entered them into the device and command fields in IRTool. Then I selected "Encode to Hex". IRTool returns a "reasonable" looking hex code. I entered this into the Pronto2NeoConverter Excel spreadsheet and got the ProntoNeo code: "0 f 6c 4 60 aa 16 3f 84 3f 5f a 44 44 44 0 0 0 0 0 40 0 4 44 4 44 40 0 bf 47 bc 1a 7c 3". I entered this code as the "Learned I/R Code" on an unused Neo button with NeoHack 0.7 and downloaded the resultant file into the Neo. It doesn't work.
What did I do wrong? I think I followed directions exactly, but I am having no luck... Can anyone help me with this. It is one of only two "toggled" codes that I have to deal with.
Thanks in advance,
Gary D. Walborn
This message was edited by Gary D. Walborn on 08/05/02 18:27.19.
|
|
Post 2 made on Monday August 5, 2002 at 16:29 |
regban Founding Member |
Joined: Posts: | March 2002 27 |
|
|
I have already posted the solution.
Search these forum with this: "Yamaha extended codes". You will find my solution (04/12/02 07:10:02).
If you need the 6 CH On/Off codes, I can do that.
Good luck!
|
|
OP | Post 3 made on Monday August 5, 2002 at 18:22 |
Gary D. Walborn Long Time Member |
|
|
Actually, it was your post that I used to "discover" the code listed in my post. It didn't work :-( Either I am not following you instructions well enough, or something else is wrong that I can't identify. Any help you can give would be greatly appreciated.
This message was edited by Gary D. Walborn on 08/05/02 18:27.52.
|
|
Post 4 made on Tuesday August 6, 2002 at 06:07 |
regban Founding Member |
Joined: Posts: | March 2002 27 |
|
|
Try these codes:
6-CH On: 0 f 6c 3 61 44 16 3f aa 3f 5f bc f2 b 21 10 11 11 1 1 0 0 10 0 1 10 10 11 10 1 1 7c 3
6-CH Off: 0 f 6c 3 61 44 16 3f aa 3f 5f bc f2 b 21 10 11 11 1 1 0 0 10 1 1 10 10 10 10 1 1 7c 3
|
|
Post 5 made on Tuesday August 6, 2002 at 06:20 |
regban Founding Member |
Joined: Posts: | March 2002 27 |
|
|
I have checked the procedure for the conversion and everything is ok. Be sure to remove blanks, new line or text when you paste the codes.
|
|
OP | Post 6 made on Tuesday August 6, 2002 at 09:29 |
Gary D. Walborn Long Time Member |
|
|
Thanks! I'll give these codes a try and see if I can figure out where I went wrong with your procedure.
Thanks again,
Gary Walborn
|
|
Post 7 made on Tuesday August 6, 2002 at 12:01 |
joelmeans Long Time Member |
Joined: Posts: | August 2002 13 |
|
|
Gary, you mentioned that you found a .pdf of the extended IR codes on Yamaha's website. Can you tell me exactly where you found that? I have a RX-V630 receiver and would like to get the IR codes. Thanks, Joel Means
|
|
Post 8 made on Tuesday August 6, 2002 at 12:58 |
regban Founding Member |
Joined: Posts: | March 2002 27 |
|
|
|
OP | Post 9 made on Tuesday August 6, 2002 at 23:36 |
Gary D. Walborn Long Time Member |
|
|
regban,
THANKS for the 6-CH codes! They work just fine. I'm going to go back over the conversion process and see if I can find where I went wrong. You're a lifesaver!
With many thanks,
Gary D. Walborn
|
|
Post 10 made on Wednesday August 7, 2002 at 01:58 |
allamand Founding Member |
Joined: Posts: | October 2001 513 |
|
|
Make sure you have the newest version of the Excel spreedsheet, it is version 1.5.2
-steve
|
-steve |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|