Post 1 made on Friday July 19, 2002 at 13:54 |
I have my control setup pretty much the way I want it with one exception.
I would like to move for example the ten digit key pad for VCR to the first page shown when VCR is selected.
How can I do this? All of my atemps have gotten me know where.
|
|
Post 2 made on Friday July 19, 2002 at 15:12 |
Try this (only way I know how):
Make a new device identical to your current vcr device (same manufac/code set). Then copy and paste the pages from your old vcr device to the new one in the order you want. This is going to kill any links/jumps you have though. So make sure you check your setups afterwards.
Once you have it all set up right, delete the old vcr device.
|
|
Post 3 made on Saturday July 20, 2002 at 10:11 |
JohnY2050 Long Time Member |
Joined: Posts: | June 2002 230 |
|
|
1.highlight the #pad page and right click and cut. 2. Highlight the page above where you want the #page at and right click and press paste. This works for me.
|
|
Post 4 made on Saturday July 20, 2002 at 18:50 |
Or use NeoSynch (available at the Util Download)
|
|
OP | Post 5 made on Friday July 26, 2002 at 18:10 |
Thanks for the help. Sorry I am late coming back. I have been working on my PC.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.