Post 1 made on Monday June 24, 2002 at 12:17 |
Has anyone figured out a way to make the LCD light up whenever you touch it? Unlike the 2000, it doesn't sense light level making the LCD pretty worthless in a dark room. You have to fumble for the side light button before hitting anything on the touch panel rather than just tapping it to make it light up.
|
|
Post 2 made on Monday June 24, 2002 at 18:20 |
allamand Founding Member |
Joined: Posts: | October 2001 513 |
|
|
press and hold "MODE" then "Setup" then turn the Backlight all the way up one past 120 seconds to ON...
Done
Has to be done on the remote, not the software
|
-steve |
|
Post 3 made on Monday June 24, 2002 at 23:55 |
triodemark Founding Member |
|
|
Just want to add to the above reply, you can then back down the LCD display time down to however long you want it to stay on. Because when you up the backlight time, the LCD time goes up with it.
|
|
Post 4 made on Sunday June 30, 2002 at 05:02 |
I tried to alter past 120 seconds backlight time, but there´s no "On".
Why does it not work with my RC3200?
Regards
aasubo
|
|
Post 5 made on Sunday June 30, 2002 at 11:36 |
RWI Founding Member |
Joined: Posts: | December 2001 592 |
|
|
You may not have the latest firmware
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.