Does anyone have any codes or .ncf for Harmon Kardon AVR510 pre-amp or DVD50 cd/dvd player. Not available on HK site. Learn command won't work.

Thanks

I have the same problem, so help me with this codes, in fact my real concern is to know how to make it learn how to change device in the H/K AVR, by this moment I have to use both controls.

Please contact me at [email protected] , I'll apreciated this a lot.

Regards, Toño

Hi, Im Toño, and I also have an AVR510, please, if you found some codes please send it tu me via my account: [email protected] The mail problem I found, is that the NeoPronto 500 doesnt learn how to change devices. other buttons copied.

I have the H/K avr210 and had a very hard time with it
as well. I did finally manage to get the codes you are
looking for(with a combination of other remotes and
hours of work)that work great for my avr210. I will try
to upload my ncf to this site. It may be worth a try to
see if it will work for your avr510. 'cause I know you
will have very few options, I looked for months!

My ncf also has some other very difficult learned
codes and discretes for this reciever and: Tv Toshiba 42H81, Sat/HD Reciever Toshiba Dst300, DVD Pan. rp56

Good Luck!!
Russ

Hi,

I'm having the same problems as you. Trying to teach my European version of NEO (SBC RU930), where for some reason Philips has removed the built in code for H/K tuners (0137 is the code in the US version TSU500) which I think otherwise would work to control the AVR series.

I have been able to teach the NEO everything but the input selectors AVR, DVD, CD, TAPE, VCR, TV, CBL/SAT. For some strange reason I was able to teach it the codes for input VIDEO4 and 6 CH. DIRECT...

Does anyone have the HEX codes for H/K receivers or know how to extract them from the preprogrammed codes in the NEO??? Please help...

//Chris

Here is a FIX for all the H/K uses that have the RU930, and would like to use the TSU500 database of codes, just make a backup of the old database, which is in the dir /philips/neoedit/RU930 and then take the datebase from /philips/neoedit/TSU500 The datebase's are named TSU500.dat and RU930.dat

-steve

I'm afraid you will find the device code(0137) will give you only a few working buttons. I had to learn the input selections and some others from a R/S remote.
Thanks to Steve, you should be able to get started by
at least getting the device code entered.

Good Luck!
Russ

I have an AVR-510.
They are not the prettyest pages on my neo but they are functional. I will post my system ncf shortly.
Steve Gubala

same problems with DENON Receiver AVR 3200. Has anyone an idea ? Philips has not.
Peter

Sorry people,

I submitted my file a week ago. I don't know ho long it takes to get them up on the board...

Steve G

I sent the ncf to those who had their emails above. If you want my ncf. Drop me a note at [email protected].

The file is on the site now.
Try it at
[Link: remotecentral.com]

Steve Gubala

This message was edited by steven gubala on 06/23/02 15:47.05.

.

This message was edited by Cyberdude on 06/19/02 12:38.02.