Post 1 made on Friday February 24, 2006 at 12:11 |
RoboMonkey Long Time Member |
Joined: Posts: | August 2002 85 |
|
|
Hi,
I'm looking to replace my Pronto 3000 because I fancy a change, I'd really like a Nevo but the overdraft says no!!
I don't know why but I never considered the Neo or 3200 previously, could somebody help me answer the following questions on the Marantz 3200
1. Can you program all 4 hard buttons below the screen? 2. Do all buttons send the IR signal on first press? 3. Can you program the entire screen, or are you stuck with the time\date etc.? 4. Is there a docking station available?
Thankyou in advance for any help.
Regards, Mark
|
|
Post 2 made on Friday February 24, 2006 at 12:35 |
tkrug Long Time Member |
Joined: Posts: | July 2002 435 |
|
|
1. No, you can really only program the middle two. The left button accesses setup mode. The right button either takes you to a device page or (with hacking) to a user-created start page.
2. For the hard buttons, yes, but if the screen is OFF you have to touch the screen or press a button to turn it on before any touchscreen commands are sent.
3. You are stuck with the date and time at the top and the 4 button labels at the bottom.
4. No
As one of the biggest Neo supporters....I'd give the Harmony 520 or 880 a look. I switched to the 520 for wife approval...and got it. The 520 is only $99 and the 880 can be had for around $170.
|
-Tim Pronto Neo FAQ: [Link: remotecentral.com] |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.