| Post 1 made on Thursday November 24, 2005 at 14:36 |
darken Lurking Member |
Joined:
Posts: | November 2005
1 |
|
|
I have a Bang & Olufsen LC2 Light control module. I used the original B&O remote control and learned the codes with the Pronto Neo - but nothing happens. The original remote works fine. Can somebody please tell me if it's possible to get the Pronto Neo work with my light control. I saw a CCF file from the Philips TS-1000 for LC2 - can I use this codes someway.
Thanks
Darken
|
|
| Post 2 made on Friday November 25, 2005 at 11:43 |
tkrug Long Time Member |
Joined:
Posts: | July 2002
435 |
|
|
I'm not sure if you can use the Neo. I believe that B&O is one of the brands that operate outside of the "normal" range of IR frequencies/wavelengths. You may need to check your manual to see where B&O operates and what the range of the Neo is. I have a feeling that the Neo is not able to transmit the B&O codes.
|
-Tim Pronto Neo FAQ: [Link: remotecentral.com] |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
