 |
 |
|
|
Philips ProntoNEO Family Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | Wont download anymore This thread has 6 replies. Displaying all posts. |
|
| Post 1 made on Sunday February 6, 2005 at 22:36 |
Pidgy Lurking Member |
Joined:
Posts: | February 2005
2 |
|
|
Hope someone can help.
I have operated the TSU500 for about 18 months.
It has firmware 1.5.3, and I am using the 2.0.5 software.
It had a system crash last week, and would not operate anymore.
I had to hit the reset button, and revert back to original configuration to get it working.
I went to download my back-up .ncf file, and get an error stating this not the correct configuration.
I tried to create a new TSU500 configuartion with a single device.
The same error occurs. I suspect the crash is permanent, and its time to buy another. Any Ideas ?
|
|
| Post 2 made on Monday February 7, 2005 at 12:56 |
tkrug Long Time Member |
Joined:
Posts: | July 2002
435 |
|
|
try updating the firmware on the remoteand see if that helps.
|
-Tim Pronto Neo FAQ: [Link: remotecentral.com] |
|
| OP | Post 3 made on Tuesday February 8, 2005 at 19:37 |
Pidgy Lurking Member |
Joined:
Posts: | February 2005
2 |
|
|
Thnak you for your reply.
I went to Phillips and found Neo updater V2.1.3 for the TSU500.
It contains firmware 1.5.3 which is what I already have. I donwloaded from Phillips anyway, and installed it to the remote.
I then tried my old file, and a new file I created with just one device as a TSU500 type .ncf file. I will not download either. I still receive the same message, "Trying to download into a device not designed for this configuration file."
I tried in setup mode and use mode as well. Any other thoughts ?.
Thanks again.
|
|
| Post 4 made on Sunday September 25, 2005 at 16:15 |
eokeez Lurking Member |
Joined:
Posts: | September 2005
1 |
|
|
I had the same problem. In my case it appears that NeoEdit is capable of detecting the ProntoNEO on COM1 for upload to my PC, however it tries to download to PronoNEO using COM2, resulting in the message "Trying to download into a device not designed for this configuration file". Under Options/Connection I changed it to COM1 and then it worked again.
|
|
| Post 5 made on Thursday February 15, 2007 at 03:48 |
sirjoe74 Lurking Member |
Joined:
Posts: | November 2006
1 |
|
|
Hi!
I've got the same problem, but I did not succeed to solve it.
I'd like to know how I could set my connection to com1 under Windows XP.
I am not anble to find any kind of port setting to switch it to 'com1'
Thanks for yor help.
|
|
| Post 6 made on Saturday May 26, 2007 at 21:11 |
Jeepaholic Lurking Member |
Joined:
Posts: | February 2007
7 |
|
|
While in NeoEdit, click on the Options tab at the top, then Connections and pull down Com1. It didn't work for me though.
|
Sleep well and dream of large women |
|
| Post 7 made on Monday January 14, 2008 at 08:04 |
Freddan101 Long Time Member |
Joined:
Posts: | August 2003
21 |
|
|
It could be something as simple as changing to another brand of batteries. I used a cheap brand and had problems communicating with the remote. Finally I changed batteries and it work like a charm!
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
