| Post 1 made on Friday September 10, 2004 at 15:51 |
shcohenmd Lurking Member |
Joined:
Posts: | September 2004
1 |
|
|
Does anyone have the codes for the Marantz SR-18 receiver?
I see them for the Pronto1000, but not the Neo TSU500
Thanks!
|
|
| Post 2 made on Friday September 10, 2004 at 18:57 |
ac-ste Long Time Member |
Joined:
Posts: | November 2002
99 |
|
|
So convert it from a ccf.- to a ncf. file
1. Open ccf with Prontoedit
2. Copy hex codes you need into Marantz RC 3200 Software
3. Open RC3200 ncf with Neohacker
4. save it as TSU 500 ncf with Neohacker
5. Open it with Neoedit
br
Steffen
|
|
| Post 3 made on Saturday September 11, 2004 at 21:46 |
Mike Stewart Long Time Member |
Joined:
Posts: | March 2003
95 |
|
|
You might also try downloading the standard NCF files from the Marantz website and opening them with RC3200 Setup. If you're using an RC3200, you should have no problem simply using copy and paste in RC3200 Setup between two NCF files for the devices you want. If you are using a Neo, be sure to copy the codes from the RC3200's two extra hard buttons to on-screen buttons in your NCF before saving as a Neo file; this will keep you from losing those codes.
Another thing to be aware of is that the standard NCF files from the Marantz website take a LONG time to load (up to 7-8 minutes on my ancient dual pII-400 desktop and Celeron 700 laptop), so give the program quite a while to load the NCF before assuming that the program has locked up or frozen.
Good luck.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
