 |
 |
|
|
Philips ProntoNEO Family Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | Learned code This thread has 6 replies. Displaying all posts. |
|
| Post 1 made on Tuesday July 6, 2004 at 20:03 |
I had to install all the codes by learning them from the other remotes. Will I loose the codes if I try to edit some of the buttons by using NeoEdit on my PC?
|
|
| Post 2 made on Wednesday July 7, 2004 at 00:52 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,233 |
|
|
no, just upload your configuration from the remote to the PC first. SAVE a Master Backup first, then go to town. What exactly do you want to edit?
|
|
|
| OP | Post 3 made on Wednesday July 7, 2004 at 18:53 |
I just want to add a few buttons and add a "jump".
When you say upload, is that the same as pluging the neo in to the PC and hitting the download icon. I find no upload comand.
This message was edited by alkohalic on 07/07/04 18:58.
|
|
| Post 4 made on Friday July 9, 2004 at 06:57 |
davehk Long Time Member |
Joined:
Posts: | March 2003
123 |
|
|
File -> Upload from device
IIRC
Download goes the other way - from PC to Neo
|
|
| OP | Post 5 made on Tuesday July 13, 2004 at 20:24 |
I dont know how to upload. Maybe the version I have doesn't have this. Can anyone help?
|
|
| Post 6 made on Wednesday July 14, 2004 at 13:01 |
RC Geek Advanced Member |
Joined:
Posts: | April 2003
826 |
|
|
Up at the top, under the blue bar, click on the word FILE - it's on the far left side. This will bring up a menu with things in it like NEW, OPEN, etc. Look down the list and click on "UPLOAD FROM RC DEVICE". This will take the information from the remote and put it on the PC.
|
Having once decided to achieve a certain task, achieve it at all costs of tedium and distaste. The gain in self-confidence of having accomplished a tiresome labor is immense. -----Arnold Bennett |
|
| Post 7 made on Thursday July 15, 2004 at 09:17 |
Mike Stewart Long Time Member |
Joined:
Posts: | March 2003
95 |
|
|
IIRC, older versions of the software didn't have the capability to upload configuration to the PC. Download the latest version of NeoEdit (2.0.7) from the Neo files section here and try uploading again.
While you're at it, download the latest firmware (1.5.3) but DON'T UPGRADE THE FIRMWARE BEFORE UPLOADING TO THE PC or you'll lose your configuration. After you've successfully backed up your NCF, upgrade the firmware and re-download your configuration.
Good luck.
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
