| Post 1 made on Monday February 2, 2004 at 01:58 |
Patrice Forest Long Time Member |
|
|
Has enyone been able to control the Lutron Graphix eye with a Philips TSU-500 (Neo? We have used Neohacker program to convert a Marantz RC-3200 file with Hex codes to Neo file, but still doesn't work.
Remote will not learn these codes directly from the RC-3200.
|
|
| Post 2 made on Monday February 2, 2004 at 08:40 |
Mike Stewart Long Time Member |
Joined:
Posts: | March 2003
95 |
|
|
Try searching this forum using "lutron" or my username to find relevant posts. All Lutron products use the same codes, but sometimes with different results.
Your Neo may be an early production model that will not accept longer codes, such as those used by Lutron.
I use two RC3200s to control a Lutron Grafik Eye GRX-2404 with no problems, but both of mine must be later production models.
Good luck.
|
|
| Post 3 made on Wednesday June 23, 2004 at 10:11 |
Can you give me a ncf file to OFF Grafik Eye or Telume.
see my forum: PRBLM Pronto neo learning
|
|
| Post 4 made on Wednesday June 30, 2004 at 18:43 |
Ian Heaford Long Time Member |
|
|
I have an NCF that works my Lutron Telume perfectly .. drop me an email if you want to try it ...
Ian
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
