I have a Sharp Aquos 37" lcd and would like discrete codes for the input select (rather than the cycling through the inputs as on the remote). In the manual, there are ASCII codes speeced for this function via the RS232 input.

I translated these to HEX via an ASCII-HEX converter and then put these into NEOhacker and then into the Neo but they didn't work.

Any other suggestions (the ASCII-HEX converter only had 2 digits and I was expecting 4 digit numbers) or does anyone have the discrete codes.

Thanks
Graeme

The Ascii RS-232 codes have absolutely nothing to do with the Discrete IR Codes. 2 different Birds. I havent seen anyone decode the IR Discrete codes for the 37's yet, but there was some talk about them in the Custom Installation forum......

Thank you Impaqt - I went onto the Customer Installation forum and got the codes. They work excellently ... except for the input 3 code (and there also does not appear to be a TV input code). If anyone here has those two codes, I'd really love to have them.

Thanks again
Graeme

Hello I'm very new to the Neo but I am desparate to programme it for the AV input select for the Sharp AQUOS LC-30AD1E. I've picked up codes from the installers form of the following form :-
SHARP-AQUOS (1,50) Input1
0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 068b

but I don't know how to get them into the Neo
Any help much appreciated
Thanks