I have a new Mits that has some additional inputs for an HD Cable Box and a firewire HD VCR. None of those older discrete codes for a standard Mits (ie: set remote to 090 etc etc.) will work for these new inputs. Anyone know how I can get a Pronto to get these two new inputs?

This might be best for a new thread. But I have an old MItsubishi TV 5150, I am trying to set up my Neo to control. I am trying to find the codes for the inputs. Anyone know how or were I can find these codes?

Here are thwe Mist codes.

Set the Slide Switch at the top of the Mitsubishi Remote to TV.
Press and hold the POWER button, and while holding the power button enter 090.

Now the remote functions like this:

Power - Power On Only
Stop - Power Off Only
Pause - AV Reset

Pressing INPUT (or DEVICE Up on newer models) followed by:
PIP = DTV
1 = Input 1
2 = Input 2
3 = Input 3
4 = Input 4
5 = DVD / Component 1
6 = Component 2
SQV = Input STB
QV = Input VGA
PIP CH Up = Antenna A
PIP CH Down = Antenna B

Note: Do not aim the "press" of the input button at the learning remote. Only the second press of the button.

Learn the desired commands to your universal remote.
When done, press and hold POWER button and enter code 000 on your Mits remote to return to its normal functioning mode.

So once you are in the 090 mode which one of these inputs/buttons actually is for the FIREWIRE??

I have a new TV with 2 HDMI inputs.

I tried the above with the remote, all works great right up to and including the first HDMI input. I tried all the keys but can't find a key that works the HDMI-2 input.

Am I missing somthing?

I have a new TV as well and have the same problem. I have one DVI input but no key will take me directly to that input.

so... where is HDMI 2? Monlink is HDMI 1

I think SQV is HDMI 1. Tried all the other keys but could not get to HDMI 2.