| Post 1 made on Tuesday May 9, 2006 at 20:48 |
edkoz Long Time Member |
Joined:
Posts: | March 2006
15 |
|
|
Was looking around on the web and found a new remote from crestron. Looks a lot like my favorite MX3000. Anyone familar with the crestron MT-1000 ??? Does it have the same features as the mx3000 ?
|
Ed Kozlowsky
Penfield NY |
|
| Post 2 made on Tuesday May 9, 2006 at 20:53 |
Control Remotes Super Member |
Joined:
Posts: | August 2003
3,434 |
|
|
Yes, it's the same basic design. I believe there has been some customization for Crestron though. Thank you, Damon DG = = = = = http://www.ProRemotes.com - Authorized Dealer & Remote Programming Services
|
Remote Programming Services for URC Remotes http://www.PremierAVDesigns.com - 914-509-5360 Follow me on Twitter @HomeTheaterNY |
|
| Post 3 made on Tuesday May 9, 2006 at 23:33 |
8ate8 Advanced Member |
Joined:
Posts: | November 2005
778 |
|
|
Yea, take a look at their ML-600: [Link: crestron.com] Look familiar? ;) Basically an MX-800 without the programming port and the guts are changed out to work with Crestron.
|
|
| Post 4 made on Wednesday May 10, 2006 at 12:39 |
Glackowitz RC Moderator |
Joined:
Posts: | May 2002
3,793 |
|
|
All of the Crestron/URC remotes are RF only and do not send any IR commands
They are setup in Crestron VTPro-e software, and work only with crestron, They still upload the same, even come with the download cables
We have used a few ML-500's which are modified MX800's and a few ML-600's which are Modified MX850's
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
