Post 1 made on Wednesday May 3, 2006 at 17:30 |
ckemp29 Long Time Member |
Joined: Posts: | February 2006 407 |
|
|
I am about to get this box installed in our clients home theater room and I was just wandering if anybody has had any control issues with it. I will be using a MX-3000 with a mrf-300 to control the system. Would like to know which codes to use as well. Thanks.
|
Chad Kemp A/V Connections |
|
Post 2 made on Wednesday May 3, 2006 at 17:36 |
CCD Super Member |
Joined: Posts: | August 2005 2,731 |
|
|
Just did one! You should just learn the codes from the TV1 remote. The only way to control TV2 is via the RF remote that Dish supplies unless you set the unit to single mode. Email me I have the codes in an .MXF file. I do not know if that will help with the mx3000?
|
|
|
OP | Post 3 made on Thursday May 4, 2006 at 10:04 |
ckemp29 Long Time Member |
Joined: Posts: | February 2006 407 |
|
|
Which URC did you use? Did it work good? Go ahead and send me the file if you would. Thanks.
|
Chad Kemp A/V Connections |
|
Post 4 made on Thursday May 4, 2006 at 16:18 |
CCD Super Member |
Joined: Posts: | August 2005 2,731 |
|
|
Chad you have mail. For the benefit of everyone who may find this in a search....I had to learn them both times I have used these. I hear there are 8 sets of codes there is a way to set them in the 622. The only way to control TV2 is to put the rcvr in single mode otherwise it is rf only.
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.