| Post 1 made on Monday April 17, 2006 at 17:26 |
str1der Long Time Member |
Joined:
Posts: | October 2003
35 |
|
|
Replaced my 700 with a new 850. Was able to move over my config just fine. I just added a Motorlla 6412 Cable/DVR box so I downloaded a mxf file from the forum. The file came over fine. It has a lot of learned codes in it. When hooked to the PC and using test on the various buttons it works perfect. I then download it (doing a complete with all learned codes) but when I do those buttons don't work. I haven't seen this before. Anyone ever run into this?
|
|
| Post 2 made on Monday April 17, 2006 at 18:49 |
scoop city Advanced Member |
|
|
Had a problem with DCT6412 a couple of times. Quite a bit of time troubleshooting spent, program re loads, different data bases, changed emitters etc........everything worked fine except very hit and miss with DCT6412......all other codes and macros and operation worked.......finally put new battwries in URC.....worked fine after that. (80% of all problems are power supply related.....should have remembered)
|
|
| OP | Post 3 made on Monday April 17, 2006 at 19:35 |
str1der Long Time Member |
Joined:
Posts: | October 2003
35 |
|
|
Thanks for the tip but these are brand new batteries. I even used the default config from the IR database and it does the same thing. What doesn't make sense is while it's connected I can send test commands from the laptop through the remote and they work fine on the 6412.
|
|
| Post 4 made on Monday April 17, 2006 at 20:43 |
gmealer Long Time Member |
Joined:
Posts: | April 2006
31 |
|
|
You did check the IR Database first, right? The MX950 one has DCT6412 codes, which I've been using successfully.
|
|
| OP | Post 5 made on Monday April 17, 2006 at 21:45 |
str1der Long Time Member |
Joined:
Posts: | October 2003
35 |
|
|
Yep I used the one in the IR database under cable/motorola/dct6412
|
|
| Post 6 made on Monday April 17, 2006 at 22:22 |
Louis Twist Long Time Member |
Joined:
Posts: | February 2006
79 |
|
|
I have a comcast 6412 at home and I used the cable/comcast/6208
preprogramed codeset. with my 850/mrf300 setup. From time to time I have seen strange things from my remotes but a quick reboot seems to solve the problems.
|
|
| OP | Post 7 made on Monday April 17, 2006 at 23:01 |
str1der Long Time Member |
Joined:
Posts: | October 2003
35 |
|
|
Well I think I have it working. I had to delete all the Cable box devices and start from scratch and reload from the ir database and that seemed to fix it.
|
|
| Post 8 made on Tuesday April 18, 2006 at 09:31 |
James Paul Hartbarger Long Time Member |
Joined:
Posts: | December 2005
485 |
|
|
A Comcast installer told me the Motorola 6412 box that Comcast deployes has a modified IR code set from the base 6412 box.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
