| Post 1 made on Sunday April 16, 2006 at 08:20 |
chuckken12 Long Time Member |
Joined:
Posts: | April 2006
18 |
|
|
On the charging cradle at the bottom there are 4 metal prongs...Are they supposed to all be exactly even?...Or is the prong on the far right supposed to be lower?...I am having problems with the red and blue lights...It is showing red/blue when it is not charged, but if I jiggle the remote or set it down real careful then I get the 2 red lights...sometimes it shows that it is charging even when one is red and one is blue...I even bought a new battery but it does the same thing...HELP.
|
|
| OP | Post 2 made on Sunday April 16, 2006 at 09:25 |
chuckken12 Long Time Member |
Joined:
Posts: | April 2006
18 |
|
|
I also wanted to add that even when the power meter says it is charging, it doesn't charge...What the heck is going on with this piece of junk?...Can the charging cradle actually go bad?...Any help will be appreciated.
|
|
| Post 3 made on Sunday April 16, 2006 at 12:45 |
shnakz69 Active Member |
Joined:
Posts: | February 2006
737 |
|
|
the metal prongs need ro be making contact with the remote..it would ideal for all the prongs to be the same length.
|
|
| Post 4 made on Monday April 17, 2006 at 17:32 |
ljckbailey Long Time Member |
Joined:
Posts: | October 2003
285 |
|
|
Find and appropriate tool and gently bend back the prongs that are "out of position". They should be all the same, oriented vertically and springy to the touch. Remove and replace the remote gently and keep an eye on the connecting fingers.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
