Post 1 made on Monday April 10, 2006 at 10:25 |
ravi355 Lurking Member |
Joined: Posts: | August 2005 6 |
|
|
I am trying to program the MX3000 to control the KENWOOD 4080 receiver and couldnt do it .
does anybody else use this receiver ?. IT has a RF remote and a RF receiver wire is connected to the back of the receiver . None of the built in codes worked for MX3000 and so I went with the learning option . The remote does the learning , but when I test the code , nothing happens . I even tried to change the IR/RF output format for the audio in the remote to be only RF as the KENWOOD is RF but with no success . I would appreciate if anybody could help me on this .
Also I am using the MRF-250 and the lights on it blink when I use the MX3000 to control the receiver , but nothing happens .
|
|
Post 2 made on Monday April 10, 2006 at 12:30 |
Surf Remote Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
The MX-3000 (nor any other universal remote) will not control the Kenwood via RF. RF is only used by the MX-3000 to communicate with the MRF-250. Remove the RF antenna from the Kenwood and check the Kenwood manual to see if there's anything else you need to do to enable IR control. Mike www.SurfRemoteControl.com
|
www.SurfRemoteControl.comTHX-certified video calibrator and contributing writer, ProjectorReviews.com |
|
OP | Post 3 made on Friday April 14, 2006 at 16:29 |
ravi355 Lurking Member |
Joined: Posts: | August 2005 6 |
|
|
I dont have the manual with me and Couldnt get it online . May be if I use a IR to RF converter , will that fix my problem .
|
|
Post 4 made on Friday April 14, 2006 at 16:54 |
Surf Remote Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
No, that won't help either. You cannot control the Kenwood directly via RF other than using the Kenwood remote. Have you removed the RF antenna and then tried the Kenwood receiver codes in the IR database?
|
www.SurfRemoteControl.comTHX-certified video calibrator and contributing writer, ProjectorReviews.com |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.