| Post 1 made on Monday April 10, 2006 at 10:23 |
mooneyass Lurking Member |
Joined:
Posts: | September 2005
3 |
|
|
Hey Guys,
I've been trying to get control over my HTPC with my MX-600 and MRF-100. I've tried my IRMan as well as my TIRA with identical results. I'm finding that the codes sent by the remote are not consistent. About every 3-5th button press I'll actually get a repeat code.
The HTPC and MRF-100 are in the basement. I'm thinking there are a couple of potential causes:
1: The IR receiver (TIRA) is being overwhelmed by the MRF-100
2: The code is longer than the listening portion in the HTPC
Any ideas?
Wes
|
|
| OP | Post 2 made on Wednesday April 12, 2006 at 09:36 |
mooneyass Lurking Member |
Joined:
Posts: | September 2005
3 |
|
|
Thought I'd post back in case someone has this problem in the future. All signals going through the MRF-100 get borked. The IR signal from the remote is flawless.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
