| Post 1 made on Thursday April 6, 2006 at 14:06 |
Kam G Long Time Member |
Joined:
Posts: | January 2003
59 |
|
|
anybody made the file for crestron 418 gatway yet? mx remote that crestron uses is not the 850, so the cursor sucks!
|
|
| Post 2 made on Thursday April 6, 2006 at 22:50 |
Glackowitz RC Moderator |
Joined:
Posts: | May 2002
3,793 |
|
|
the ML500 is a modified MX800, that will be going away and the New ML600 will take its place...Modified MX850
RTI will work with the 433 Gateway with no issues, there is a file that has 15 ID#'s and 999 joins for the RTI remotes, you will need to upload a firmware update fo the T1 to make it work properly
There was a CCF file in the pronto area but have heard that there are incorrect buttons and some that dont work
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
| Post 3 made on Friday April 7, 2006 at 13:45 |
I understand that some Crestron dealers wrote the necessary code to allow the MX-800 to work with a Crestron gateway well before Crestron released the ML-500 and that the same was done with the MX-850.
Is there any reason the MX-900 won't be able to be connected similarly? Or is it too soon to be able to answer that question?
|
|
| Post 4 made on Sunday April 9, 2006 at 21:34 |
mr2channel Select Member |
Joined:
Posts: | August 2002
1,701 |
|
|
I don't know about the 900 but the mx-950 will work on the Crestron Gateway.
|
What part of "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." do you not understand? |
|
| Post 5 made on Sunday April 16, 2006 at 21:57 |
I just noticed that the ML-600 has replaced the ML-500 on the Crestron website. I don't know when this occurred.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
