| Post 1 made on Tuesday December 19, 2000 at 22:31 |
Joe Searfoss Historic Forum Post |
|
|
Does anyone know if you can assign a macro to a button on the Main-1 screen ? If so how do you go about it ? I have created my Main-1 screen but when you go into the macro programming there is no way to switch to that screen. If you cannot program a macro on thisscreen what good is it ?
Thanks
Joe
|
|
| OP | Post 2 made on Tuesday December 19, 2000 at 23:36 |
Daniel Tonks Historic Forum Post |
|
|
Take a look at the fine print on the MAIN screen after entering Macro mode. It tells you how to switch between programming a button on that screen or under a device screen.
|
|
| OP | Post 3 made on Wednesday December 20, 2000 at 18:24 |
Joe Searfoss Historic Forum Post |
|
|
I see how to switch to a device screen and program a macro. I also see how to program a macro on the Main screen, but how do you switch to the MAIN-1 screen ? When in the Macro mode the main button does not switch screens.
Thanks
Joe
|
|
| OP | Post 4 made on Thursday December 21, 2000 at 03:44 |
Daniel Tonks Historic Forum Post |
|
|
Ah, I see. You can't actually customize macros on MAIN-1. MAIN-1 duplicates the device and system macros from MAIN.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
