Your Universal Remote Control Center
RemoteCentral.com
URC's Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
MX-850 Remote Program Failed
This thread has 3 replies. Displaying all posts.
Post 1 made on Saturday April 23, 2016 at 06:12
eban67
Junior Member
Joined:
Posts:
April 2016
10
Good morning folks,

I have two MX-850 and they both give me IROUT FAILED and IRAMP FAILED in both Win7 and Win10. How can I solve this issue please?

Also, I've noticed some of my number keys doesn't send the signals, hence my MARCOS don't work either.


Thanks in advance

Last edited by eban67 on April 23, 2016 06:27.
OP | Post 2 made on Saturday April 23, 2016 at 07:55
eban67
Junior Member
Joined:
Posts:
April 2016
10
UPDATE:

I've found the problem.

1. Regarding the IROUT and IRAMP failures, apparently that is a common response to programming the MX850 remote but it nothing to be concerned about.

2. Regarding the number keys not responding to commands. Apparently even though I got the "GOOD" response after learning the code, the GOOD wasn't good at all. I had to learn the codes a few times before it actually worked. I think the original remote batteries weren't as charged as it would've been needed to be.


All is well now!!!
Post 3 made on Sunday April 24, 2016 at 00:37
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,523
After learning all codes, I recommend downloading the file and doing a visual test of buttons, right then and there (you don't need to be by your devices).

By that I mean, when a code is captured correctly, you can press a button briefly or for a long period, and the transmit icon will indicate exactly how long you've held the key for. But when a code is learned wrong (not necessarily due to anything you've done - it's just flaky), a code may only cause the transmit icon to flicker briefly, despite how long you hold it down, or it may stay lit for longer than you hold the button (looks laggy). In those cases, those buttons need to be relearned.

It may take 2 or 3 cycles of this to get everything correct - and at that point, it's time to go test them on the actual devices!
OP | Post 4 made on Sunday April 24, 2016 at 12:07
eban67
Junior Member
Joined:
Posts:
April 2016
10
Great advice bro...


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse