Your Universal Remote Control Center
RemoteCentral.com
URC's Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
2 MX850 remotes interfering with each other......help
This thread has 4 replies. Displaying all posts.
Post 1 made on Saturday January 21, 2012 at 19:51
Ernest T
Junior Member
Joined:
Posts:
January 2012
3
NEWBIE needs help: I have a downstairs system configured to work with a MX850 remote. Just recently I added an upstairs system also configured to work with a second MX850 remote. Both units have the MRF 250 base station. All components in each configuration are different. However, the upstairs MX850 will occasionally change the channel on the downstairs unit. What do I need to do to separate the 2 systems?

Thanks!
Post 2 made on Sunday January 22, 2012 at 12:43
Duct Tape
Super Member
Joined:
Posts:
November 2008
4,067
do you have different RFID addresses programmed into the remote?  Did you also make sure that the RFID on each base station is matching the address programmed into the remote?   Make sure you dont leave the basestation set on an ID of Zero
[Link: facebook.com]
OP | Post 3 made on Sunday January 22, 2012 at 20:55
Ernest T
Junior Member
Joined:
Posts:
January 2012
3
On January 22, 2012 at 12:43, Duct Tape said...
do you have different RFID addresses programmed into the remote?  Did you also make sure that the RFID on each base station is matching the address programmed into the remote?   Make sure you dont leave the basestation set on an ID of Zero

How do I change the RFID address on the remote? I have MX Editor version 11.12.15.1. I see a way to change the base station ID on the base station and in the MX Editor software. Is that what you mean?

Thanks for your reply!
Post 4 made on Sunday January 22, 2012 at 22:29
Duct Tape
Super Member
Joined:
Posts:
November 2008
4,067
yep, that is what i was referring to.
[Link: facebook.com]
OP | Post 5 made on Monday January 23, 2012 at 19:45
Ernest T
Junior Member
Joined:
Posts:
January 2012
3
Duct Tape, thanks for the help. I set different RFIDs and so far so good.

Thanks!!


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse