| Post 1 made on Saturday January 12, 2008 at 22:24 |
krellboy Long Time Member |
Joined:
Posts: | August 2005
21 |
|
|
I posted this on the custom installer site too. My computer shows the remote is not attached but it is. I switched to a different cable, shut down and restarted the computer and reloaded the software to no avail. When I plug in the USB into the computer the remote lights up. Any idea how I can remedy this?
|
|
| Post 2 made on Monday January 14, 2008 at 00:16 |
savij Lurking Member |
Joined:
Posts: | January 2008
1 |
|
|
I had to keep unplugging and plugging my 810 back in...it seems like the remote goes into a sleep state even when connected.
|
|
| Post 3 made on Monday January 14, 2008 at 00:25 |
Johnny Canuck Long Time Member |
Joined:
Posts: | January 2003
292 |
|
|
I posted this in response to your other post:
Pull your battery out to power cycle the remote. Reinsert it and then erase your settings (hold ACTIVITIES and ENT to bring up the system setup and scroll to Erase and Reset). Once reset, then you should be able to download your config.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
