I recently purchased an MX-200 Automator. I have not been able to find a code for a Motorola MOXI DVR that will work on it. Universal Remote tech support gave me a couple of numbers that don't work so I tried erasing the Cable device and learning one button at a time. 98% of the buttons work but 5, 7, 9, CH down and the MOXI button learn ok and transmit icon lights when pressed but don't activate the function on the DVR. On the product review on this site it was mentioned that all pre-programmed codes can be erased by somehow using an AUX 155 code. I haven't been able to figure out how to do this. Anyone know how? Thanks, Ed

Motorola Moxi uses a different frequency the URC-200 cannot completely handle. You have 2 options to get it to work perfectly. 1. Send the remote to URC to get upgraded. 2. Purchase the RF-20 that has the codes built in.

To program AUX155:

1. main & ent
2. P-PRO
3. using the cursor keys choose the CAB box device
4. press SELECT
5, using the cursor keys, and perhaps the page keys choose the AUX device
6. press SELECT
7. enter 1 5 5
8. save
9. main
10. main

edmund and remotejr - thanks for your help. aux155 procedure worked to clear device of all pre-programmed codes but still could not program all the keys. Talked to factory and arranged to send back for firmware update that will allow the urc-200 to program correctly. I bought it on ebay and the box I received was marked urc-200b but the device in the box was a urc-200.
when it comes to ebay, caveat emptor! Thanks again, ed

You can get the URC UR7-G2 Gamer remote from Kmart for $3.50, it has the moxi cable code 111 on board.