| Post 1 made on Thursday July 12, 2007 at 15:47 |
steveschinks Lurking Member |
|
|
i have been having a problem with using the 350 and mrf250. when i enable the rf my comm with a denon 787 siezes to exist. once i disable the rf for the audio device i can comm ir only with the avr. i never experienced this before . tried 2 different remotes same result. i spoke with tech while programming the first remote and they said it was def. while prog. the 2 remote i noticed the problem starts once i enable rf.
i am looking for ways to resolve the problem any ideas
|
|
| Post 2 made on Friday September 21, 2007 at 16:43 |
heatmiser Lurking Member |
Joined:
Posts: | August 2007
1 |
|
|
I have noticed many problems communicating to denon with base stations. the only way i have been able to fix it is to enable the blaster on the base station and make sure it is directed at the denon. for whatever reason, the denons seem to work porrly when using an emitter. please let me know if you have found another fix.
|
|
| Post 3 made on Friday September 21, 2007 at 16:58 |
J.Todd Long Time Member |
Joined:
Posts: | August 2007
481 |
|
|
You need to offset the ir bug. The mrf-250 has to high of an output for the denon.
|
J.Todd |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
