Your Universal Remote Control Center
RemoteCentral.com
Philips iPronto Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
iPronto and NetX RF
This thread has 2 replies. Displaying all posts.
Post 1 made on Tuesday July 3, 2007 at 20:05
mburwen
Founding Member
Joined:
Posts:
August 2001
1,185
I'm sure this is old ground, but I need some help. I've had an iPronto for some time and just got a NetX device. Have done all the things I think are required to get the wireless system to operate properly, but it does not.

The NetX appears to have been installed properly - the light switches from red to orange after configuration setup and the right data appears on the NetX setup screen on the iPronto.

In the editor, I changed IR to RF in each Device Properties page and Pressed 'Auto Detect' which appears to work every time. I then downloaded the icf file into the iPronto.

Not only does the RF not work, but the IR commands still work! I haven't been able to find out if that is OK or not. Does anyone know if enabling the RF is supposed to turn off the IR? If so, seems probable that the firmware is not interpreting the RF mode. In any event if anyone can shed light on this, I'd appreciate it.
Post 2 made on Saturday July 28, 2007 at 22:55
Grimmace
Long Time Member
Joined:
Posts:
February 2003
156
Yes, turning on the RF stops the IR. Does the light on the NetX change when you hit the buttons on the remote? Try this. Setup everything the way you think it should work. D/L your ICF to the IPronto. Setup the NetX and confirm it is loaded in the IPronto. Upload the ICF to your computer, save, and then d/l to the IPronto again. Hope it helps.
Post 3 made on Sunday July 29, 2007 at 11:48
miguelito
Long Time Member
Joined:
Posts:
April 2007
12
Also try not using AutoDetect...just manually enter the NetX's name in the box. For me it is

NetX1

Works for me ;-)
...miquelito


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse