Your Universal Remote Control Center
RemoteCentral.com
Philips iPronto Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
How can I update Firmware?
This thread has 7 replies. Displaying all posts.
Post 1 made on Tuesday January 16, 2007 at 12:37
micahTV
Long Time Member
Joined:
Posts:
June 2006
74
Bought a used ipronto and it is not letting me disable the blue tools bar? How can I update the firmware if the ipronto update site is down?

Also, how can I get the ipronto apart to change out it's touchscreen?

Anyone?

Micah
Post 2 made on Tuesday January 16, 2007 at 17:22
SirKalle
Long Time Member
Joined:
Posts:
January 2003
130
Mmhh, no idea if the iPronto website is down?

There is a technical manual for the iPronto which shows you how to take that damn piece apart but I am not sure if it is "freeware" to upload it to the file area?!

Does anybody know?

Many people asked for it in the past .......

Best regards,

Kalle
OP | Post 3 made on Friday January 19, 2007 at 19:31
micahTV
Long Time Member
Joined:
Posts:
June 2006
74
SirKalle, Why would you bother to post a reply if you do not know the answers to my questions?!?!?!

Does anyone know where I can get the last firmware update since philips no longer hosts it?

Does anyone know the best way to open the remote and replace the touchscreen?

Thanks.

Micah
Post 4 made on Tuesday January 23, 2007 at 17:15
burkepaul4
Long Time Member
Joined:
Posts:
April 2006
58
on Tuesday January 23, 2007 at 22:05 ...it's new!
burkepaul4
Junior Member Joined: April 2006
Posts: 15
View Profile

[ Edit Post ]
burkepaul4
Junior Member Joined: April 2006
Posts: 13
View Profile

[ Edit Post ]

DOES ANYBODY KNOW THE DIFFERENCE BETWEEN THE NETX WIFI AND THE SBCLI100 CONVERTER RF. MY EQUIPMENT IS IN THE BOTTOM OF MY CUPBOARD AND I HAVE A MINI CONTROLLER MARMITEK IR-RF7243U AND WANT TO BE ABL TO CONTROL MY IPRONTO WITHOUT USING LINE OF SIGHT. SO WHICH IS BEST OPTION TO BUY.
I HAVE X10 MODULE AND AIARM ALL OF THEM ARE MARMITEK WHICH I CONTROL USING MY IPRONTO AND MINI CONTROLLER I HAVE NOTICED I HAVE TO USE BOUBLE COMAND IE
LINK TO JUST CONTROL X10-2
LINK TO IR JUST CONTROL X10-2
DELAY 1.0 SEC
LINK TO IR JUST CONTROL X10-OF
LINK TO JUST CONTROL X10-OF
SURELY THERE IS A EASIER WAY OF DOING IT. BEARING IN MIND IT DOES WORK BUT IT SEEM'S TO TAKE A LONG TIME.




THANK YOU
burkepaul4
Post 5 made on Tuesday January 23, 2007 at 17:27
burkepaul4
Long Time Member
Joined:
Posts:
April 2006
58
DOES ANYBODY KNOW THE DIFFERENCE BETWEEN THE NETX WIFI AND THE SBCLI100 CONVERTER RF. MY EQUIPMENT IS IN THE BOTTOM OF MY CUPBOARD AND I HAVE A MINI CONTROLLER MARMITEK IR-RF7243U AND WANT TO BE ABL TO CONTROL MY IPRONTO WITHOUT USING LINE OF SIGHT. SO WHICH IS BEST OPTION TO BUY.
I HAVE X10 MODULE AND AIARM ALL OF THEM ARE MARMITEK WHICH I CONTROL USING MY IPRONTO AND MINI CONTROLLER I HAVE NOTICED I HAVE TO USE BOUBLE COMAND IE
LINK TO JUST CONTROL X10-2
LINK TO IR JUST CONTROL X10-2
DELAY 1.0 SEC
LINK TO IR JUST CONTROL X10-OF
LINK TO JUST CONTROL X10-OF
SURELY THERE IS A EASIER WAY OF DOING IT. BEARING IN MIND IT DOES WORK BUT IT SEEM'S TO TAKE A LONG TIME.




THANK YOU
burkepaul4
OP | Post 6 made on Tuesday January 23, 2007 at 19:00
micahTV
Long Time Member
Joined:
Posts:
June 2006
74
Does anyone understand the point of these threads? If a quesitons is asked, normally you would reply if you know the answer? If you have a differnt subject, start a new thread!

Does anyone know how to get the latest firmware for the iPronto???

Micah
Post 7 made on Tuesday January 30, 2007 at 15:20
steve36
Long Time Member
Joined:
Posts:
February 2003
12
I just tried to upgrade mine by using the network menu's and pressing 'upgrade'.

It half loaded initially, up to partition 3, then failed initially claiming it could not find the firmware, so I rebooted.
It then claimed the firmware was corrupt and would need to be reloaded, luckily it immediately went to partition 3, downloaded and everything worked on.

I can not understand why this product failed, it's easier than AMX/CRESTRON etc and is relatively easy to set up. I suppose 1000+ could be a reason....
OP | Post 8 made on Wednesday January 31, 2007 at 14:16
micahTV
Long Time Member
Joined:
Posts:
June 2006
74
So your ipronto could find the firmware downlaod? Because it was my understanding that philips was not hosting the file anymore? Since they discontinued the support? I guess I will give it another try. Maybe that have it back online now...

Micah


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse