Your Universal Remote Control Center
RemoteCentral.com
Philips iPronto Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
living in uk x10 problem
This thread has 7 replies. Displaying all posts.
Post 1 made on Thursday January 11, 2007 at 13:50
burkepaul4
Long Time Member
Joined:
Posts:
April 2006
58

ipronto RU1000

i bought a couple of x10 modules. i am missing the plot here i can get my ipronto to work with my x10 lights. i knon the usa can't use RF directiy but i know european's can i have a mini controller which works ok now.my mini controller manuel tells me to to set house code P but i don't seem to work. can i use RF directly with my ipronto if so could somebody tell me how to use RF directly in indepth detail



thanks paul
burkepaul4
Post 2 made on Friday January 12, 2007 at 14:55
SirKalle
Long Time Member
Joined:
Posts:
January 2003
130
Hi Paul,

no RF is working with the iPronto!

Buy a IR receiver module to receive the IR codes from the iPronto and then the IR receiver module will transform the signals to X10 codes and send them over the power "network" to the x10 modules.

Works great! Download some .icf files here in the download section with x10 codes already on board.

Best regards,

Kalle
OP | Post 3 made on Tuesday January 23, 2007 at 16:48
burkepaul4
Long Time Member
Joined:
Posts:
April 2006
58
On January 12, 2007 at 14:55, SirKalle said...
Hi Paul,

no RF is working with the iPronto!

Buy a IR receiver module to receive the IR codes from
the iPronto and then the IR receiver module will transform
the signals to X10 codes and send them over the power
"network" to the x10 modules.

Works great! Download some .icf files here in the download
section with x10 codes already on board.

Best regards,

Kalle
burkepaul4
OP | Post 4 made on Tuesday January 23, 2007 at 16:50
burkepaul4
Long Time Member
Joined:
Posts:
April 2006
58
burkepaul4
Junior Member Joined: April 2006
Posts: 11
View Profile

[ Edit Post ]

DOES ANYBODY KNOW THE DIFFERENCE BETWEEN THE NETX WIFI AND THE SBCLI100 CONVERTER RF. MY EQUIPMENT IS IN THE BOTTOM OF MY CUPBOARD AND I HAVE A MINI CONTROLLER MARMITEK IR-RF7243U AND WANT TO BE ABL TO CONTROL MY IPRONTO WITHOUT USING LINE OF SIGHT. SO WHICH IS BEST OPTION TO BUY.
I HAVE X10 MODULE AND AIARM ALL OF THEM ARE MARMITEK WHICH I CONTROL USING MY IPRONTO AND MINI CONTROLLER I HAVE NOTICED I HAVE TO USE BOUBLE COMAND IE
LINK TO JUST CONTROL X10-2
LINK TO IR JUST CONTROL X10-2
DELAY 1.0 SEC
LINK TO IR JUST CONTROL X10-OF
LINK TO JUST CONTROL X10-OF
SURELY THERE IS A EASIER WAY OF DOING IT. BEARING IN MIND IT DOES WORK BUT IT SEEM'S TO TAKE A LONG TIME.




THANK YOU
PAUL
burkepaul4
OP | Post 5 made on Tuesday January 23, 2007 at 17:05
burkepaul4
Long Time Member
Joined:
Posts:
April 2006
58
burkepaul4
Junior Member Joined: April 2006
Posts: 13
View Profile

[ Edit Post ]

DOES ANYBODY KNOW THE DIFFERENCE BETWEEN THE NETX WIFI AND THE SBCLI100 CONVERTER RF. MY EQUIPMENT IS IN THE BOTTOM OF MY CUPBOARD AND I HAVE A MINI CONTROLLER MARMITEK IR-RF7243U AND WANT TO BE ABL TO CONTROL MY IPRONTO WITHOUT USING LINE OF SIGHT. SO WHICH IS BEST OPTION TO BUY.
I HAVE X10 MODULE AND AIARM ALL OF THEM ARE MARMITEK WHICH I CONTROL USING MY IPRONTO AND MINI CONTROLLER I HAVE NOTICED I HAVE TO USE BOUBLE COMAND IE
LINK TO JUST CONTROL X10-2
LINK TO IR JUST CONTROL X10-2
DELAY 1.0 SEC
LINK TO IR JUST CONTROL X10-OF
LINK TO JUST CONTROL X10-OF
SURELY THERE IS A EASIER WAY OF DOING IT. BEARING IN MIND IT DOES WORK BUT IT SEEM'S TO TAKE A LONG TIME.




THANK YOU
PAUL
burkepaul4
OP | Post 6 made on Tuesday January 23, 2007 at 17:09
burkepaul4
Long Time Member
Joined:
Posts:
April 2006
58
On January 12, 2007 at 14:55, SirKalle said...
Hi Paul,

no RF is working with the iPronto!

Buy a IR receiver module to receive the IR codes from
the iPronto and then the IR receiver module will transform
the signals to X10 codes and send them over the power
"network" to the x10 modules.

Works great! Download some .icf files here in the download
section with x10 codes already on board.

Best regards,

Kalle
burkepaul4
OP | Post 7 made on Tuesday January 23, 2007 at 17:29
burkepaul4
Long Time Member
Joined:
Posts:
April 2006
58
DOES ANYBODY KNOW THE DIFFERENCE BETWEEN THE NETX WIFI AND THE SBCLI100 CONVERTER RF. MY EQUIPMENT IS IN THE BOTTOM OF MY CUPBOARD AND I HAVE A MINI CONTROLLER MARMITEK IR-RF7243U AND WANT TO BE ABL TO CONTROL MY IPRONTO WITHOUT USING LINE OF SIGHT. SO WHICH IS BEST OPTION TO BUY.
I HAVE X10 MODULE AND AIARM ALL OF THEM ARE MARMITEK WHICH I CONTROL USING MY IPRONTO AND MINI CONTROLLER I HAVE NOTICED I HAVE TO USE BOUBLE COMAND IE
LINK TO JUST CONTROL X10-2
LINK TO IR JUST CONTROL X10-2
DELAY 1.0 SEC
LINK TO IR JUST CONTROL X10-OF
LINK TO JUST CONTROL X10-OF
SURELY THERE IS A EASIER WAY OF DOING IT. BEARING IN MIND IT DOES WORK BUT IT SEEM'S TO TAKE A LONG TIME.




THANK YOU
burkepaul4
Post 8 made on Thursday February 8, 2007 at 14:30
JoeyCes
One In A Million
Joined:
Posts:
May 2004
1,326
The iPronto does NOT talk RF X10, it only talks IR or RF via WIFI, the netX will connect to your WIFI network and control any IR equipment in another location as long as your WIFI network reaches there, i have used many and they work well, even with encryption, the only problem is that it is still.......JUST 802.11b!


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse