| Post 1 made on Tuesday May 16, 2006 at 18:38 |
raylinds Lurking Member |
Joined:
Posts: | January 2005
6 |
|
|
I just got an iPronto and really like it, but it does not work well with my SA 8300HD DVR Cable Box. I have to press a button for a long time- often multiple times- to get a command to work. I also have a Pronto that works fine with the box. I've tried relearning the codes several times. Any thoughts on what the problem is?
Thanks,
Ray
|
Ray |
|
| Post 2 made on Tuesday May 16, 2006 at 22:26 |
mburwen Founding Member |
Joined:
Posts: | August 2001
1,185 |
|
|
Instead of learning the codes on the iPronto - which I have found to be sometimes problematic - copy/paste the code from your Pronto pcf into the iPronto icf. I've had very good results doing that.
|
|
| OP | Post 3 made on Friday May 19, 2006 at 13:57 |
raylinds Lurking Member |
Joined:
Posts: | January 2005
6 |
|
|
|
| Post 4 made on Sunday May 21, 2006 at 21:16 |
SomeRandomNick Long Time Member |
|
|
raylinds - I too have a SA8300HD I would like to control and looking through everything I do not see anything that seems to work.
After you import that, could you upload an icf with the SA8300 settings in it - even if it is only the 8300HD in the icf?
Thanks.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
