Your Universal Remote Control Center
RemoteCentral.com
Philips iPronto Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
iPronto & Netx working - finally
This thread has 4 replies. Displaying all posts.
Post 1 made on Sunday June 5, 2005 at 18:00
utwo229
Lurking Member
Joined:
Posts:
June 2005
1
Not holding my breath, but I believe I finally have my iPronto programmed and working with Netx. I was having a lot of disconnect issues, especially when left idle overnight. After watching the config screens on the iPronto and the DHCP tables on my wireless router, I determined it was the Netx that was losing connection. I changed both the iPronto and the Netx to a fixed IP address. That seemed to help. I happened to have the gateway coded incorrectly on the iPronto and wasn't able to access the internet, so I changed the iPronto back to DHCP and left it that way. Everything remains fine now for about a week . Hope sending this post won't jinx it.
Post 2 made on Thursday June 16, 2005 at 02:55
Leinc.man
Lurking Member
Joined:
Posts:
June 2005
3
I am Having trouble with my ipronto and netx wondering how where you able to get yours to work? I bought a rfx6000 to see if it would work with it and seem's like i am having no luck making it work with each other?
Joselito
Post 3 made on Thursday June 16, 2005 at 12:11
bigwest
Long Time Member
Joined:
Posts:
June 2005
11
make sure the SSID is setup correctly and not using ANY
Post 4 made on Saturday June 18, 2005 at 13:02
tmccaffrey
Long Time Member
Joined:
Posts:
September 2004
10
make sure you dont have the netx near any 2.4ghz phone, computer, metal (ie av rack), water (ie fish tanks believe it or not). these all are possible causes for interferance.
Post 5 made on Saturday July 2, 2005 at 16:47
Eldo164
Long Time Member
Joined:
Posts:
April 2004
11
I have been having the same problem for months. What a nightmare! I read your fix and set both the iPronto and NetX to fixed IP addresses. Two weeks later I am still up and running. I also unsubscribed from my EPG account, as it seemed to lock up every morning after downloading (or trying to download) EPG info.

In any case this fix appears to be working.

THANKS!!!


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse