Post 1 made on Monday March 14, 2005 at 06:36 |
Hello, since there is the possibility for a time now to use MMC cards to program the iPronto I still have the problem that any used MMC card is not recognized by the iPronto nor for formatting nor for reading any contents. Are there any experiences with this problem? I am using Apple Computers so there is no chance to program the iPronto via USB or any other connection. That makes the iPronto almost useless. Thanks in advance for any tips.
|
|
Post 2 made on Sunday March 20, 2005 at 00:15 |
I had the same problem. But I am running virtual PC on my G5 so I can use iPronto edit and program the iPronto over my wireless LAN. That works perfect.
|
|
Post 3 made on Sunday March 27, 2005 at 02:17 |
I use my WLAN, and the transfer between PC and remote is less than a minute. Make sure you have the latest updates, which allow the MMCs to be used. Not SD card, right? They will fit, but they don't work.
|
Thanks, Phil-bert |
|
OP | Post 4 made on Sunday March 27, 2005 at 06:40 |
Hello Alberto, thanks for your reply. Would you be so kind to tell me in brief how you reach the iPronto via Wireless? How can I get contact to the configuration files?
Thanks a lot in advance for yor efforts.
Best regards
sammy
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.