Your Universal Remote Control Center
RemoteCentral.com
Philips iPronto Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
hard buttons programming
This thread has 5 replies. Displaying all posts.
Post 1 made on Tuesday October 5, 2004 at 11:09
Jean-Max
Long Time Member
Joined:
Posts:
September 2004
102
Hello
With the new firmware, is-it possible to program hard buttons of the browsers layouts to have "previous web page " and "following web page " on volume (+/-) (or Program (+/-) buttons ?
If it is possible, what is the process ?

Thanks for your help

This message was edited by Jean-Max on 10/05/04 11:16 ET.
Jean-Max
Post 2 made on Wednesday October 6, 2004 at 07:07
bassfiend
Long Time Member
Joined:
Posts:
September 2003
149
No - it's not possible to do that as far as I'm aware.

Phil
Post 3 made on Wednesday October 6, 2004 at 09:16
mspapens
Long Time Member
Joined:
Posts:
June 2004
11
It's possible to browse to the next or previous selected screen, but with the hard buttons you cannot browse to web pages.

To use different hard coded buttons for each device, you need the latest version of iProntoEdit.
OP | Post 4 made on Thursday October 7, 2004 at 02:05
Jean-Max
Long Time Member
Joined:
Posts:
September 2004
102
On 10/06/04 13:16 ET, mspapens said...
To use different hard coded buttons for each device,
you need the latest version of iProntoEdit.

I have it (1.7)

It's possible to browse to the next or previous
selected screen, but with the hard buttons you
cannot browse to web pages.

OK for the web pages :-(
But, what do you mean with "next or previous selected screen" ?
And how to teach this function to the hard buttons ?

Thanks and best regards :-)
Jean-Max
Post 5 made on Thursday October 7, 2004 at 03:12
mspapens
Long Time Member
Joined:
Posts:
June 2004
11
Jean-Max,

You have the 1.7 version of the iPronto's internal software, but you also need the latest version (now this is 2.4.3) of the iProntoEdit software. Download it from the Files section of the RemoteCentral site.
If you install it, take a look at the properties of each device. You are now able to set the hard buttons indivually per device.

With next or previous selected screen I mean this:
First you open the device called TV on your iPronto and after that you open the device called DVD. If you then would have programmed a "Back" button, you would be redirected back to the TV device. If you then press the "Next" button, you are brought back to the DVD device. Just like an internet browser.
This makes navigating between devices easier because you can get to a device with just one click.
OP | Post 6 made on Thursday October 7, 2004 at 07:06
Jean-Max
Long Time Member
Joined:
Posts:
September 2004
102
Ok, Thanks mspapens :-)

I got last version of Iprontoedit and found the hard button backward and forward programming :
Device Properties / Hard buttons / (Choice button) / Special action / Browse Backward-Forward

Best regards
Jean-Max


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse