 |
 |
|
|
Philips iPronto Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | PLEASE HELP This thread has 11 replies. Displaying all posts. |
|
| Post 1 made on Sunday October 26, 2003 at 17:23 |
adomad Lurking Member |
Joined:
Posts: | October 2003
6 |
|
|
I bought a iPronto! It worked fine till today morning! The Tochscreen doesn´t work anymore! The Philips machine starts and i can open the setup but i cant do anything in the setup because the touchscreen doesn´t work! I bought it at ebay, and the person didnt answer me! Maybe somebody can help me(I´m a newbie in this section, so if you give me some informations than in this way everybody can understand it)
Thank you very much
|
|
| Post 2 made on Sunday October 26, 2003 at 18:50 |
msarrazi Long Time Member |
Joined:
Posts: | October 2003
19 |
|
|
Possibly you need to recalibrate the screen, if you cant do that then you will probably have to reboot by pressing your stylus tip in that hole behind the ipronto table stand.
Good Luck!
|
|
| OP | Post 3 made on Monday October 27, 2003 at 00:19 |
adomad Lurking Member |
Joined:
Posts: | October 2003
6 |
|
|
I rebooted(using the reset button) it several times but the touchscreen doesn´t work even in the configuration setup!
|
|
| Post 4 made on Monday October 27, 2003 at 07:17 |
msarrazi Long Time Member |
Joined:
Posts: | October 2003
19 |
|
|
Two other things could help, first try to download the original .icf from your computer to the ipronto.
Hopefully the screen will work enough to prompt you for permission. second go to the setup screen if it works and download the latest system files. All of this assumes that you have 802.11b network installed and working. It takes about 20 minutes to upgrade but the new system files have made a huge difference in the way ipronto works. I Love mine it is a piece of engineering to be proud of.
|
|
| OP | Post 5 made on Monday October 27, 2003 at 15:00 |
adomad Lurking Member |
Joined:
Posts: | October 2003
6 |
|
|
The Original ICF File? Where can i get this one? And how can i copy it to the iPronto? via wireless lan? or via a software? If yes, which software?
|
|
| Post 6 made on Monday October 27, 2003 at 17:30 |
msarrazi Long Time Member |
Joined:
Posts: | October 2003
19 |
|
|
Original icf is the default.icf in your iprontoedit software, you should be using V2.2 and it will download to your pronto by pressing File, download to ipronto. This will all take about 5 minutes through your wirless Lan. remember the ipronto must be on and not sleeping when you do this. You should get a good idea of how to do all of this by reading pp. 41 and 42 of your owners manual.
Good Luck!
|
|
| OP | Post 7 made on Tuesday October 28, 2003 at 13:44 |
adomad Lurking Member |
Joined:
Posts: | October 2003
6 |
|
|
where can i download the software?I´dont know that much ;(
|
|
| Post 8 made on Tuesday October 28, 2003 at 14:39 |
Anthony Ultimate Member |
Joined:
Posts: | May 2001
28,870 |
|
|
|
| Post 9 made on Tuesday October 28, 2003 at 15:22 |
msarrazi Long Time Member |
Joined:
Posts: | October 2003
19 |
|
|
|
| OP | Post 10 made on Sunday November 16, 2003 at 19:51 |
adomad Lurking Member |
Joined:
Posts: | October 2003
6 |
|
|
So i have a lot problems!
First: The Touchscreen still doesnt work! I tried to upload a new icf file but he said: he can´t get informations from the ipronto check the firmware please!
OK, then i tried to update the firmware and he said cant open the site to download the update!!
What can i do?!?!?
|
|
| OP | Post 11 made on Monday November 17, 2003 at 04:11 |
adomad Lurking Member |
Joined:
Posts: | October 2003
6 |
|
|
Couldn´t look up the page boot.pronto.philips.com
This is the message when he tries to actualize the firmware
|
|
| Post 12 made on Monday November 17, 2003 at 17:36 |
Daniel Tonks Wrangler of Remotes |
Joined:
Posts: | October 1998
28,780 |
|
|
Sounds like your network settings aren't working yet.
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
