|Post 1 made on Monday July 3, 2017 at 19:34|
I have 2 Harmony Elites and 2 new LG OLED TV's the 65B6P and 65C7P. I have set up various activities with the TV's and am having lots of problems with the startup activity and input selection. It seems to be selecting the right HDMI input on the TV and the source device (e.g. DirecTV receiver) is powered on. However, it doesn't show the picture and the TV just says signal not detected. I often have to hit help one or more times or shut down a restart one or more times before it works. It doesn't seem to have a problem if the last time I was watching, before I shut everything off, was the same source device. I'm not sure if the way I set up the inputs on the TV effected this. I went byack and removed devices from the Device Connect setup in the TV but it is still having the problem. Suggestions?
|Post 2 made on Monday December 25, 2017 at 08:43 |
For some strange reason, the TV setup did not assign the input selection to the corresponding code but rather to the Exit key. The correct this:
Setting, Adjust inputs, Method 2, match Source input to Remote button
My setup is now working well, even with CEC enabled.
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.