Post 1 made on Wednesday June 19, 2013 at 14:45 |
rprousseau Lurking Member |
Joined: Posts: | December 2009 1 |
|
|
I have set my Harmony One to control my system with no issues except the following: Whenever I switch to the AV7005 menu or other functions, it switches correctly, but then will not respond to direction up/down commands. Obviously, this is a major glitch for several functions. I have tried to learn the commands from the original remote, but with the same results. I have learned the commands in both analysis and raw modes with no effect. Any advice would be much appreciated!
|
|
Post 2 made on Wednesday October 2, 2013 at 18:48 |
simonverzijl Lurking Member |
Joined: Posts: | October 2013 2 |
|
|
Hi, did you manage to solve this already?
I'm running against the exact same problem with my Marantz SR-7008. Everything seems to work but the up/down buttons. Tried to learn IR a couple of times, but this does not work :(
On the harmony support forum I see a lot of issues with Marantz equipment (but most if not all messages are >1 year old)
|
|
Post 3 made on Thursday October 3, 2013 at 09:37 |
simonverzijl Lurking Member |
Joined: Posts: | October 2013 2 |
|
|
Fixed!
There is an error in the Harmony One definitions for Marant SR-7005/SR-7007/SR-7008.
By default, the up/down arrows are defined as TuneUp and TuneDown. Replace them by 'DirectionUp/DirectionDown' and it works.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.