| Post 1 made on Wednesday November 21, 2012 at 15:59 |
colc Lurking Member |
Joined:
Posts: | November 2012
1 |
|
|
I have recently had installed a power saving board (government supplied) on my TV and Hi Fi setup
This board- Emerald brand requires a double click on the power button to switch on the TV, which does not appear to be possible on the 880, apart from removing the power board can anybody assist with my problem?
|
|
| Post 2 made on Friday November 23, 2012 at 17:50 |
jlet Super Member |
Joined:
Posts: | March 2004
2,631 |
|
|
Try changing the device "Adjust Power settings" as if the TV supported discrete power commands by selecting "A button on the remote for On, and a different button for Off". Then for the "On" function, select the option "My device needs more than one command to turn it on and off", and use 2 power toggle commands. For the "Off" function, use a single power toggle command. Good luck.
Note: You did not specify the brand/model of your TV. I assumed that it does not support the discrete power commands, but check the list of commands to see if the discrete "PowerOn" & "PowerOff" commands are available. If so, test them.
|
H659, H680, SA8300HD, TH-50PZ850, AVR-X4000 |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
