I just purchased a Harmony 650. It controls 5 devices only. I currently have a Harmony 520 programmed for 8-9 devices.

I wish to use my 520 Programs. If I press "Update Remote" on my Software will my 9 devices be transferred to the 650, which can only hold 5 devices?

Also what happens to the Programs on my 520. Can I use the same software?

Thanks for any help.

You need to make another userid for your 650. Ask Harmony support to copy (as much as they can) your 520 configuration to your 650.

You can use the Replace remote function and all 8 devices will be transfered to your 650.  The only problem with this is if down the line you need to replace a device, you will not be able until your devices are under 5 devices.

Thanks.

Everything works perfectly in the Devices and Activies except when I Power off the "Watch PS3" everything turns off except "TV". Then I have to press the HELP button and turn off the TV. The TV turns off in all the other Activities. Its driving me nuts. Tried reducing and increasing the delay but to no avail.

Try increasing the TV Inter-Device delay. If that does not work, then try increasing both the Inter-Device and Inter-Key delays to the same value in case the "criss-crossed" and/or "added together" bug(s) is/are still present.

Thanks. Will try.

Edit: tried everything but TV will not turn off when using PS3 Activity. Works in all other Activities. Can't figure that out. Will return 650 I suppose.