Post 1 made on Friday July 27, 2012 at 05:13 |
zoothorn Lurking Member |
Joined: Posts: | December 2003 5 |
|
|
Hello, I've searched and can't seem to find my issue discussed. Maybe I'm missing something simple.
I've just set up a 659 and the display window has 3 buttons on each side for a total of six buttons. The set up software shows these programmable buttons in groups of 6 and allows you to program any function on each of the six buttons.
My problem is when using the remote the first line of the display is taken up by what activity you are in or what device you have selected to control. The top two soft buttons then become unusable.
When looking that the display the first line says something like 'watch TV' and the top two buttons are useless. The remaining buttons are 'pushed down' (i.e. what showed as assigned to buttons 1 and 2 in the setup software is now assigned to 3 and 4 and what was assigned to 5 and 6 are on the next page.
Am I missing something? Can I set it to not display the activity or device and gain functionality of all 6 soft buttons on each page?
Thanks.
Zoot.
|
|
Post 2 made on Friday July 27, 2012 at 18:35 |
jlet Super Member |
Joined: Posts: | March 2004 2,631 |
|
|
Yes, by changing the "Menu Format" to 6 buttons (instead of4). The option is under "Remote Settings (tab at top) > Display Settings".
|
H659, H680, SA8300HD, TH-50PZ850, AVR-X4000 |
|
OP | Post 3 made on Saturday July 28, 2012 at 00:56 |
zoothorn Lurking Member |
Joined: Posts: | December 2003 5 |
|
|
Awesome! Great info. works like a champ. I'm sure I had worked my way through there but missed that last option.
Thanks!!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.