Post 1 made on Wednesday July 4, 2012 at 17:17 |
cannondalege Founding Member |
Joined: Posts: | February 2002 2 |
|
|
I have had this problem for years on each of my Cablevision SA 8300HD dvrs. I decided to try and determine if there is a setting to change the behavior. When I hit the ff button during playback, the dvr randomly chooses the ff speed. Is there a way to force it to select one of the speeds all the time or, at a minimum, choose the slowest speed all the time? It is really frustrating when it chooses the fastest speed and bolts well past the end of commercials.
|
|
Post 2 made on Wednesday July 4, 2012 at 19:26 |
jlet Super Member |
Joined: Posts: | March 2004 2,631 |
|
|
I used to have the same/similar problem. The "Replay" button would not reset the FF speed, but the "Play" button did. So my solution was to precede the "Replay" command with the "Play" command. At the time, the activity sequence feature did not exist, so I taught the Play + Replay commands as a single command in RAW mode, and mapped it to the Replay button.
Note: In my case, the bug was fixed (a while back) by one of the many SA8300HD firmware auto updates.
|
H659, H680, SA8300HD, TH-50PZ850, AVR-X4000 |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.